Make
the right choice for you and your environment
To find out how - Telephone: 01633 53 54 55 or Email (see contacts)
Micaul Solar are Grant Approved Accredited Installers under the BRE Microgeneration Certification Scheme MCS1074
|
To find out how - Telephone: 01633 53 54 55 or Email (see contacts)
Micaul Solar are Grant Approved Accredited Installers under the BRE Microgeneration Certification Scheme MCS1074 |
|
Micaul Solar First Company in Wales to be Microgeneration Accredited for Heat Pumps and Solar Thermal
|
Micaul Solar Skirting Heating ThermaSkirt® is a hi-tech aluminium alloy extrusion, with two watertight channels ‘moulded’ into the back. Patented connectors and covers allow it to be installed all around the room in a matter of minutes, and it connects straight onto a conventional plumbed system – just
like a steel radiator. skirting. Because ThermaSkirt® is made from an alloy that is 5 times more effective at passing heat than steel, the warm water from your condensing or combi boiler (gas or electric) soon raises the temperature of the ThermaSkirt® and the room. Because it's all around your room, within minutes you have a lovely warm environment. Because it’s such a clever idea you save heating costs, wall space and warm-up times.
Why is ThermaSkirt® better than a radiator?
at low level, you don’t get drafts or hot spots such as on the ceiling – radiators heat by convection (air movement) more than by radiation.
No more bleeding radiators! ThermaSkirt® acts like a pipe and so will never need bleeding once installed correctly.
ceiling and then falls. Great if you’re 10 foot tall, but not much use to your average home owner.
Thermaskirt® and Renewable Energy Systems
Renewable energy sources such as GSHP and Solar require compatible heating systems to maximise efficiency and to warm quickly. ThermaSkirt® is manufactured from an aluminium alloy that is 5 times more effective at radiating heat than traditional steel radiators. The greater surface area of the Regency OG profile makes it suitable for such applications, as well as being appropriately designed for more traditional homes and extensions. The smaller Urban LT may be used in upstairs applications such as bedrooms and lofts, as it can often provide adequate heating for suitably insulated properties, even at 40°C flow temperature.
In highly demanding situations such as all-glass conservatories, loft conversions or poorly insulated properties, the Regency OG can deliver over 700btu (210 W) per metre length to heat virtually any space.
ThermaSkirt® comes in a variety of colours and textures as shown below.
How we became a Thermaskirt® distributor and installer
We first came across Thermaskirt® when we were asked to install an air source heat pump into a refurbished home in Capel Bangor, Aberystwyth. The customer was keen to fit Thermaskirt® throughout the whole property but we were very sceptical about both whether it would be able to dissipate the heat being generated by the heat pump or whether it compliment the heat pump in providing the correct and controllable level of heating and comfort required.
Following some discussions with Discrete Heat and our own design calculations it was clear that our concerns were unjustified. The heat pump and Thermaskirt® system was installed and worked so well with our core business of supplying and installing renewable energy systems, we decided that we would become a distributor and installer ourselves.
To find out more, contact us on 01633 53 54 55
|
Because
ThermaSkirt® heats the room from all directions
With
radiators, the heat goes straight up, then along the 
